Sabtu, 04 Juni 2011

CCNA Exploration 4.0

CCNA Exploration 4.0

CCNA v4 E1 Module 2 (above 90%)

Posted: 05 Jun 2011 02:54 AM PDT

1. Which two layers of the OSI model have the same functions as the TCP/IP model Network Access Layer? (Choose two.)

Physical
Data Link

2. What is a primary function of the trailer information added by the data link layer encapsulation?
supports error detection

3. During the encapsulation process, what occurs at the data link layer?

The physical address is added.

4. What device is considered an intermediary device?

switch

5. Which layer encapsulates the segment into packets?

data link


6. Which statements correctly identify the role of intermediary devices in the network? (Choose three.)

determine pathways for data
retime and retransmit data signals
manage data flows

7. What can be identified by examining the network layer header?

the path to use to reach the destination host

8. What is the proper order of the layers of the OSI model from the highest layer to the lowest layer?

application, presentation, session, transport, network, data link, physical

9. Refer to the exhibit. Which three labels correctly identify the network types for the network segments that are shown? (Choose three.)

Network B — WAN
Network C — LAN
Network A — LAN

10. What are the key functions of encapsulation? (Choose three.)

identifies pieces of data as part of the same communication
ensures that data pieces can be directed to the correct receiving end device
enables the reassembly of complete messages

11. Refer to the exhibit. Which networking term describes the data interleaving process represented in the graphic?

encapsulation

12. What is a PDU?

a layer specific encapsulation

13. Refer to the exhibit. "Cell A" at IP address 10.0.0.34 has established an IP session with "IP Phone 1″ at IP address 172.16.1.103. Based upon the graphic, which device type best describes the function of wireless device "Cell A?"

an end device

14. Refer to the exhibit. Which set of devices contains only end devices?

E, F, H, I, J

15. Refer to the exhibit. Which term correctly identifies the device type that is included in the green area?

intermediary

16. Which three statements best describe a Local Area Network (LAN)? (Choose three.)
A LAN is usually in a single geographical area.
The network is administered by a single organization.
A LAN provides network services and access to applications for users within a common organization.

17. Refer to the exhibit. What type of network is shown?

LAN

18. What is the purpose of the TCP/IP Network Access layer?

data representation, encoding, and control

19. Which characteristic correctly refers to end devices in a network?

retime and retransmit data signals

20. What is the primary purpose of Layer 4 port assignment?

to identify the processes or services that are communicating within the end devices

21. Select the statements that are correct concerning network protocols. (Choose three.)

define the structure of layer specific PDU's
outline the functions necessary for communications between layers
require layer dependent encapsulations

Related posts:

  1. CCNA 1 Module 2

CCNA v4 E1 Module 3 (above 90%)

Posted: 04 Jun 2011 02:54 PM PDT

1. What is the purpose of resource records in DNS?
used by the server to resolve names

2. What are two forms of application layer software?
applications
syntax

3. What application layer protocol is commonly used to support for file transfers between a client and a server?
FTP

4. What are two characteristics of peer-to-peer networks?
decentralized resources
resource sharing without a dedicated server

5. Which layer of the OSI model supplies services that allow user to interface with the network?
application

6. What are three properties of peer-to-peer applications?
acts as both a client and server within the same communication
hybrid mode includes a centralized directory of files
does not require specialized software

7. What is the role of the OSI application layer?
provides the interface between the applications on either end of the network

8. What three protocols operate at the Application layer of the OSI model?
DNS, SMTP, POP

9. Which email components are used to forward mail between servers?
MDA, MTA

10. Which two protocols are used to control the transfer of web resources from a web server to a client browser?
HTTPS
HTTP

11. Which statements are correct concerning the role of the MTA in handling email?
receives email from the client's MUA
passes email to the MDA for final delivery
uses SMTP to route email between servers

12. As compared to SSH, what is the primary disadvantage of telnet?
does not support encryption

13. Which application layer protocols correctly match a corresponding function?
DNS dynamically allocates IP addresses to hosts
Telnet provides a virtual connection for remote access

14. What is the automated service that matches resource names with the required IP address?
DNS

15. Refer to the exhibit. What is the destination port for the communication that is represented on line 5?
80

16. What are two characteristics of clients in data networks?
initiate data exchanges
may upload data to servers

17. What application layer protocol describes the services that are used for file sharing in Microsoft networks?
SMB

18. A network administrator is designing a network for a new branch office of twenty-five users. What are the advantages of using a client-server model?
centralized administration
security is easier to enforce

19. A small home network has been installed to interconnect three computers together for gaming and file sharing. What two properties represent this network type?
User accounts are centralized.
Security is difficult to enforce.

20. How does the application layer on a server usually process multiple client request for services?
uses support from lower layer functions to distinguish between connections to the service

Related posts:

  1. CCNA 1 Chapter 3
  2. CCNA v4 E1 Module 2 (above 90%)

CCNA 1 Final 2011

Posted: 04 Jun 2011 02:54 AM PDT

Exam Viewer – ENetwork Final Exam – Network Fundamentals (Version 4.0)

Below you will find the assessment items as presented on the exam as well as the scoring rules associated with the item.
Use of the exam information in the Exam Viewer is subject to the terms of the Academy Connection Website Usage Agreement between you and Cisco. The purpose of the Exam Viewer is to support instruction while not compromising exam security for other Cisco Networking Academies or students. This material should not be distributed outside a proctored and controlled setting. If misuse is found, action will be taken to limit access to assessment content. Please remember to logout and close your browser window after using the Exam Viewer.

1
When connectionless protocols are implemented at the lower layers of the OSI model, what are usually used to acknowledge the data receipt and request the retransmission of missing data?
connectionless acknowledgements
upper-layer connection-oriented protocols
Network layer IP protocols
Transport layer UDP protocols

 

Scoring Rule For: correctness of response
2 points for Option 2
0 points for any other option
Max Value = 2

 

2



Refer to the exhibit. Each media link is labeled. What type of cable should be used to connect the different devices?
Connection 1 – rollover cable
Connection 2 – straight-through cable
Connection 3 – crossover cable
Connection 1 – crossover cable
Connection 2 – rollover cable
Connection 3 – crossover cable
Connection 1 – straight-through cable
Connection 2 – crossover cable
Connection 3 – crossover cable
Connection 1 – straight-through cable
Connection 2 – crossover cable
Connection 3 – straight-through cable
Connection 1 – crossover cable
Connection 2 – straight-through cable
Connection 3 – crossover cable

 

Scoring Rule For: correctness of response
2 points for Option 4
0 points for any other option
Max Value = 2

 

3
Which OSI layer protocol does IP rely on to determine whether packets have been lost and to request retransmission?
application
presentation
session
transport

 

Scoring Rule For: correctness of response
2 points for Option 4
0 points for any other option
Max Value = 2

 

4
What is true regarding network layer addressing? (Choose three.)
uses a flat structure
prevent broadcasts
heirarchical
uniquely identifies each host
48 bits in length
contains a network portion

 

Scoring Rule For: correctness of response
Option 3, Option 4, and Option 6 are correct.
1 point for each correct option.
0 points if more options are selected than required.
Max Value = 3

 

5
A PC can not connect to any remote websites, ping its default gateway, or ping a printer that is functioning properly on the local network segment. Which action will verify that the TCP/IP stack is functioning correctly on this PC?
Use the ipconfig /all command at the host's command prompt.
Use the ping 127.0.0.1 command at the command prompt.
Use the traceroute command at the command prompt to identify any failures on the path to the gateway.
Use FTP to check for connectivity to remote sites.
Download a troubleshooting tool from the PC manufacturer’s website.

 

Scoring Rule For: correctness of response
2 points for Option 2
0 points for any other option
Max Value = 2

 

6
Which type of media is immune to EMI and RFI? (Choose two.)
10 Base-T
10 Base-2
10 Base-5
100 Base-FX
100 Base TX
1000 Base LX

 

Scoring Rule For: correctness of response
Option 4 and Option 6 are correct.
1 point for each correct option.
0 points if more options are selected than required.
Max Value = 2

 

7

Refer to the exhibit. What does the IP address 192.168.33.2 represent?
The host’s default gateway.
The host’s IP address.
The host’s primary domain name server.
The IP address of the website resolver1.mooki.local.
The IP address of the host’s homepage.

 

Scoring Rule For: correctness of response
2 points for Option 3
0 points for any other option
Max Value = 2

 

8



Refer to the exhibit. The diagram represents the process of sending email between clients. Select the list below that correctly identifies the component or protocol used at each numbered stage of the diagram.
1.MUA 2.MDA 3.MTA 4.SMTP 5.MTA 6.POP 7.MDA 8.MUA
1.MUA 2.POP 3.MDA 4.SMTP 5.MTA 6.MDA 7.SMTP 8.MUA
1.MUA 2.POP 3.SMTP 4.MDA 5.MTA 6.SMTP 7.POP 8.MUA
1.MDA 2.SMTP 3.MTA 4.SMTP 5.MTA 6.MUA 7.POP 8.MDA
1.MUA 2.SMTP 3.MTA 4.SMTP 5.MTA 6.MDA 7.POP 8.MUA

 

Scoring Rule For: correctness of response
2 points for Option 5
0 points for any other option
Max Value = 2

 

9
Which three statements characterize the transport layer protocols? (Choose three.)
TCP and UDP port numbers are used by application layer protocols.
TCP uses port numbers to provide reliable transportation of IP packets.
UDP uses windowing and acknowledgments for reliable transfer of data.
TCP uses windowing and sequencing to provide reliable transfer of data.
TCP is a connection-oriented protocol. UDP is a connectionless protocol.

 

Scoring Rule For: correctness of response
Option 1, Option 4, and Option 5 are correct.
1 point for each correct option.
0 points if more options are selected than required.
Max Value = 3

 

10
Which of the following OSI layers offers reliable, connection-oriented data communication services?
application
presentation
session
transport
network

 

Scoring Rule For: correctness of response
2 points for Option 4
0 points for any other option
Max Value = 2

 

11

Examine the graphic with current configurations. Host A in the Clerical offices failed and was replaced. Although a ping to 127.0.0.1 was successful, the replacement computer can not access the company network. What is the likely cause of the problem?
IP address incorrectly entered
network cables unplugged
subnet mask incorrectly entered
network card failure

 

Scoring Rule For: correctness of response
2 points for Option 3
0 points for any other option
Max Value = 2

 

12



Refer to the exhibit. A network technician is trying to determine the correct IP address configuration for Host A. What is a valid configuration for Host A?
IP address: 192.168.100.19; Subnet Mask: 255.255.255.248; Default Gateway: 192.16.1.2
IP address: 192.168.100.20; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.100.17
IP address: 192.168.100.21; Subnet Mask: 255.255.255.248; Default Gateway: 192.168.100.18
IP address: 192.168.100.22; Subnet Mask: 255.255.255.240; Default Gateway: 10.1.1.5
IP address: 192.168.100.30; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.1.1
IP address: 192.168.100.31; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.100.18

 

Scoring Rule For: correctness of response
2 points for Option 2
0 points for any other option
Max Value = 2

 

13
As network administrator, what is the subnet mask that allows 510 hosts given the IP address 172.30.0.0?
255.255.0.0
255.255.248.0
255.255.252.0
255.255.254.0
255.255.255.0
255.255.255.128

 

Scoring Rule For: correctness of response
2 points for Option 4
0 points for any other option
Max Value = 2

 

14
What are three characteristics of CSMA/CD? (Choose three.)
Devices can be configured with a higher transmission priority.
A jam signal indicates that the collision has cleared and the media is not busy.
A device listens and waits until the media is not busy before transmitting.
The device with the electronic token is the only one that can transmit after a collision.
All of the devices on a segment see data that passes on the network medium.
After detecting a collision, hosts can attempt to resume transmission after a random time delay has expired.

 

Scoring Rule For: correctness of response
Option 3, Option 5, and Option 6 are correct.
1 point for each correct option.
0 points if more options are selected than required.
Max Value = 3

 

15
Which of the following are the address ranges of the private IP addresses? (Choose three.)
10.0.0.0 to 10.255.255.255
200.100.50.0 to 200.100.25.255
150.150.0.0 to 150.150.255.255
172.16.0.0 to 172.31.255.255
192.168.0.0 to 192.168.255.255
127.16.0.0 to 127.31.255.255

 

Scoring Rule For: correctness of response
Option 1, Option 4, and Option 5 are correct.
1 point for each correct option.
0 points if more options are selected than required.
Max Value = 3

 

16
Which combination of network id and subnet mask correctly identifies all IP addresses from 172.16.128.0 through 172.16.159.255?
172.16.128.0 255.255.255.224
172.16.128.0 255.255.0.0
172.16.128.0 255.255.192.0
172.16.128.0 255.255.224.0
172.16.128.0 255.255.255.192

 

Scoring Rule For: correctness of response
2 points for Option 4
0 points for any other option
Max Value = 2

 

17
Which password is automatically encrypted when it is created?
vty
aux
console
enable secret
enable password

 

Scoring Rule For: correctness of response
2 points for Option 4
0 points for any other option
Max Value = 2

 

18
Due to a security violation, the router passwords must be changed. What information can be learned from the following configuration entries? (Choose two.) 

Router(config)# line vty 0 3
Router(config-line)# password c13c0
Router(config-line)# login
The entries specify three Telnet lines for remote access.
The entries specify four Telnet lines for remote access.
The entries set the console and Telnet password to “c13c0″.
Telnet access will be denied because the Telnet configuration is incomplete.
Access will be permitted for Telnet using “c13c0″ as the password.

 

Scoring Rule For: correctness of response
Option 2 and Option 5 are correct.
1 point for each correct option.
0 points if more options are selected than required.
Max Value = 2

 

19
When must a router serial interface be configured with the clock rate command?
when the interface is functioning as a DTE device
when the interface timers have been cleared
when the connected DTE device is shut down
when the interface is functioning as a DCE device

 

Scoring Rule For: correctness of response
2 points for Option 4
0 points for any other option
Max Value = 2

 

20
Which two functions of the OSI model occur at layer two? (Choose two.)
physical addressing
encoding
routing
cabling
media access control

 

Scoring Rule For: correctness of response
Option 1 and Option 5 are correct.
1 point for each correct option.
0 points if more options are selected than required.
Max Value = 2

 

21
A routing issue has occurred in you internetwork. Which of the following type of devices should be examined to isolate this error?
access point
host
hub
router
switch

 

Scoring Rule For: correctness of response
2 points for Option 4
0 points for any other option
Max Value = 2

 

22



Refer to the exhibit. With the router running NAT, what IP addresses can be applied to the computer to allow access to the Internet? (Choose three.)
192.168.18.38
192.168.18.48
192.168.18.49
192.168.18.52
192.168.18.59
192.168.18.63

 

Scoring Rule For: correctness of response
Option 3, Option 4, and Option 5 are correct.
1 point for each correct option.
0 points if more options are selected than required.
Max Value = 3

 

23



Refer to the exhibit. What two facts can be determined from the information that is given? (Choose two.)
This exchange is part of the three-way handshake.
The source port indicates that a Telnet session has been initiated.
The data is flowing from server to client.
The destination port indicates that an HTTP session has been initiated.
The data listed is associated with the transport layer.
The source port does not support communication with the destination port that is listed.

 

Scoring Rule For: correctness of response
Option 4 and Option 5 are correct.
1 point for each correct option.
0 points if more options are selected than required.
Max Value = 2

 

24



Refer to the exhibit. Host A attempts to establish a TCP/IP session with host C. During this attempt, a frame was captured with the source MAC address 0050.7320.D632 and the destination MAC address 0030.8517.44C4. The packet inside the captured frame has an IP source address 192.168.7.5, and the destination IP address is 192.168.219.24. At which point in the network was this packet captured?
leaving host A
leaving ATL
leaving Dallas
leaving NYC

 

Scoring Rule For: correctness of response
2 points for Option 3
0 points for any other option
Max Value = 2

 

25



Refer to the exhibit. A network administrator remotely accesses the CLI of RouterB from PC1. Which two statements are true about the application layer protocol that is used to make this connection? (Choose two.)
The data is encrypted.
The connection type is called a VTY session.
A server process is running on PC1.
A GET request is sent to RouterB.
The application name is the same for the service, protocol, and client.

 

Scoring Rule For: correctness of response
Option 2 and Option 5 are correct.
1 point for each correct option.
0 points if more options are selected than required.
Max Value = 2

 

26



Refer to the exhibit. Cable 1 and cable 2 have the ends wired for specific physical layer requirements. The table lists each segment by number and the cable which has been installed by the network technician between the network components on that segment. From the data given, which segments have the correct cable installed? (Choose three.)
segment1
segment2
segment3
segment4
segment5

 

Scoring Rule For: correctness of response
Option 1, Option 3, and Option 4 are correct.
1 point for each correct option.
0 points if more options are selected than required.
Max Value = 3

 

27



Refer to the exhibit. What three statements are true about the IP configuration that is shown? (Choose three.)
The address that is assigned to the computer represents private addressing.
The computer is unable to communicate outside of the local network.
The network of this computer can have 126 hosts.
The prefix of the computer address is /27.
The IP address that is assigned to the computer is routable on the Internet.
The IP address that is assigned to the computer is a broadcast address.

 

Scoring Rule For: correctness of response
Option 1, Option 2, and Option 4 are correct.
1 point for each correct option.
0 points if more options are selected than required.
Max Value = 3

 

28
Which three IPv4 addresses represent a broadcast for a subnet? (Choose three.)
172.16.4.63 /26
172.16.4.129 /26
172.16.4.191 /26
172.16.4.51 /27
172.16.4.95 /27
172.16.4.221 /27

 

Scoring Rule For: correctness of response
Option 1, Option 3, and Option 5 are correct.
1 point for each correct option.
0 points if more options are selected than required.
Max Value = 3

 

29

Refer to the exhibit. On the basis of the IP configuration that is shown, what is the reason that Host A and Host B are unable to communicate outside the local network?
Host A was assigned a network address.
Host B was assigned a multicast address.
Host A and Host B belong to different networks.
The gateway address was assigned a broadcast address.

 

Scoring Rule For: correctness of response
2 points for Option 4
0 points for any other option
Max Value = 2

 

30
The Layer 4 header contains which type of information to aid in the delivery of data?
service port number
host logical address
device physical address
virtual connection identifier

 

Scoring Rule For: correctness of response
2 points for Option 1
0 points for any other option
Max Value = 2

 

31
During the encapsulation process, which identifiers are added at the transport layer?
two networks routing the packets
two applications communicating the data
two hosts at either end of the communication
two nodes on the local network exchanging the frame

 

Scoring Rule For: correctness of response
2 points for Option 2
0 points for any other option
Max Value = 2

 

32

Refer to the exhibit. What is the correct destination socket number for a web page request from Host A to the web server?
00-08-a3-b6-ce-46
198.133.219.25:80
http://www.cisco.com
C 198.133.219.0/24 is directly connected, FastEthernet0/0

 

Scoring Rule For: correctness of response
2 points for Option 2
0 points for any other option
Max Value = 2

 

33



Refer to the exhibit. Which logical topology best describes the exhibited network?
star
ring
point-to-point
multiaccess
mesh

 

Scoring Rule For: correctness of response
2 points for Option 4
0 points for any other option
Max Value = 2

 

34

Refer to the exhibit. Host A is transmitting data to host B. What addresses will host A use to for the destination IP and MAC addresses in this communication?
Destination MAC: BBBB:BBBB:BBBB Destination IP: 172.22.0.62
Destination MAC: DDDD:DDDD:DDDD Destination IP: 172.22.0.75
Destination MAC: EEEE:EEEE:EEEE Destination IP: 172.22.0.62
Destination MAC: BBBB:BBBB:BBBB Destination IP: 172.22.0.75
Destination MAC: EEEE:EEEE:EEEE Destination IP: 172.22.0.75
Destination MAC: DDDD:DDDD:DDDD Destination IP: 172.22.0.94

 

Scoring Rule For: correctness of response
2 points for Option 5
0 points for any other option
Max Value = 2

 

35

Refer to the exhibit. A router, whose table is shown, receives a packet that is destined for 192.168.1.4. How will router treat the packet?
The packet will be dropped.
The packet will be forwarded via FastEthernet 0/0.
The packet will be forwarded to the destination host.
The packet will be forwarded to the 192.168.1.3 next-hop address.

 

Scoring Rule For: correctness of response
2 points for Option 3
0 points for any other option
Max Value = 2

 

36

Refer to the exhibit. Which set of devices contains only intermediary devices?
A, B, D, G
A, B, E, F
C, D, G, I
G, H, I, J

 

Scoring Rule For: correctness of response
2 points for Option 1
0 points for any other option
Max Value = 2

 

37

Refer to the exhibit. A technician is working on a network problem that requires verification of the router LAN interface. What address should be pinged from this host to confirm that the router interface is operational?
127.0.0.1
192.168.64.196
192.168.254.1
192.168.254.9
192.168.254.254

 

Scoring Rule For: correctness of response
2 points for Option 3
0 points for any other option
Max Value = 2

 

38
Which prompt represents the appropriate mode used for the copy running-config startup-config command ?
Switch-6J>
Switch-6J#
Switch-6J(config)#
Switch-6J(config-if)#
Switch-6J(config-line)#

 

Scoring Rule For: correctness of response
2 points for Option 2
0 points for any other option
Max Value = 2

 

39
A technician is asked to secure the privileged EXEC mode of a switch by requiring a password. Which type of password would require this login and be considered the most secure?
console
enable
enable secret
VTY

 

Scoring Rule For: correctness of response
2 points for Option 3
0 points for any other option
Max Value = 2

 

40
Which range of port numbers are reserved for services that are commonly used by applications that run on servers?
0 to 255
0 to 1023
1024 to 49151
49152 to 65535

 

Scoring Rule For: correctness of response
2 points for Option 2
0 points for any other option
Max Value = 2

 

41



Refer to the exhibit. Which two statements describe the information that is represented in the header? (Choose two.)
This is a server response.
The UDP protocol is being used.
The destination port indicates a Telnet session.
The return segment will contain a source port of 23.
The next session originated from the client of this session will use the source port number 13358.

 

Scoring Rule For: correctness of response
Option 3 and Option 4 are correct.
1 point for each correct option.
0 points if more options are selected than required.
Max Value = 2

 

42
In a Cisco IOS device, where is the startup-configuration file stored?
Flash
NVRAM
RAM
ROM

 

Scoring Rule For: correctness of response
2 points for Option 2
0 points for any other option
Max Value = 2

 

43



Refer to the exhibit. What two facts can be determined about the exhibited topology? (Choose two.)
A single broadcast domain is present
Two logical address ranges are required.
Three broadcast domains are shown.
Four networks are needed.
Five collision domains exist.

 

Scoring Rule For: correctness of response
Option 1 and Option 5 are correct.
1 point for each correct option.
0 points if more options are selected than required.
Max Value = 2

 

44

Refer to the exhibit. Assume all devices are using default configurations. How many subnets are required to address the topology that is shown?
1
3
4
5
7

 

Scoring Rule For: correctness of response
2 points for Option 2
0 points for any other option
Max Value = 2

 

45



Refer to the exhibit. A student has wired each end of a CAT 5e cable as shown. What is the result? (Choose two.)
The cable is unusable and must be rewired.
The cable is suitable for use as a Gigabit Ethernet straight-through.
The cable is suitable for use as a Fast Ethernet crossover.
The cable is suitable for use as a rollover cable.
The cable is suitable for use as a Gigabit Ethernet crossover.
The cable is suitable for use between two 100 Mbps Auto-MDIX capable switches.

 

Scoring Rule For: correctness of response
Option 3 and Option 6 are correct.
1 point for each correct option.
0 points if more options are selected than required.
Max Value = 2

 

46


Refer to the exhibit. The tracert command is initiated from PC1 to the destination PC4. Which device will send a response to the initial packet from PC1?
London
Paris
Athens
Ankara
PC4

 

Scoring Rule For: correctness of response
2 points for Option 3
0 points for any other option
Max Value = 2

 

47


Refer to the exhibit. What is required on host A for a network technician to create the initial configuration on RouterA?
a FTP client
a telnet client
a terminal emulation program
a web browser

 

Scoring Rule For: correctness of response
2 points for Option 3
0 points for any other option
Max Value = 2

 

48


Refer to the exhibit. When computer A sends a frame to computer D, what computers receive the frame?
only computer D
only computer A and computer D
only computer B, computer C, and computer D
all computers

 

Scoring Rule For: correctness of response
2 points for Option 1
0 points for any other option
Max Value = 2

 

49


Refer to the exhibit. What function does router RT_A need to provide to allow Internet access for hosts in this network?
address translation
DHCP services
ftpd
web server

 

Scoring Rule For: correctness of response
2 points for Option 1
0 points for any other option
Max Value = 2

 

50
Refer to the exhibit. The network containing router B is experiencing problems. A network associate has isolated the issue in this network to router B? What action can be preformed to correct the network issue?
issue the ip address command on interface FastEthernet 0/0
issue the no shutdown command on interface FastEthernet 0/1
issue the clock rate command on interface Serial 0/0/0
issue the description command on interface Serial 0/0/1

 

Scoring Rule For: correctness of response
2 points for Option 2
0 points for any other option
Max Value = 2

Tags:

Related posts:

  1. CCNA Exploration 1 – Module 10 Exam Answers 2011
  2. CCNA Exploration 1 – Module 11 Exam Answers 2011
  3. CCNA Exploration 1 – Module 8 Exam Answers 2011
Diposting oleh di

Tidak ada komentar:

Posting Komentar

Langganan: Posting Komentar (Atom)