Objective: To introduce the Cisco Router.
Lab Equipment: We will be using "Router 1". To select "Router 1" click on the button labeled Router 1 at the top of your screen..
1. If you have not done so already, click on the 'Router 1' button located at the top of your screen. The router 1 window will open and the text "Press Enter to Start" will appear. If your lab window closes, click the 'Tile' button on the toolbar to view both windows at the same time, or right-click this screen and choose 'print' to print this lab.
2. Click inside the Router 1 window and press the 'Enter" key to get started. You are now connected to Router 1 and are at the user mode prompt. The prompt is broken down into two parts, the hostname and the mode. "Router" is the Router 1's hostname and ">" means you are in user mode.
3. Next type the command 'enable' to get to the privileged mode prompt.
4. To get back to the user mode, simply type 'disable'. From the user mode type 'logout' or 'exit' to leave the router.
Copyright (c) 2002 Boson Software, Inc. All Rights Reserved.
Tidak ada komentar:
Posting Komentar